Filter
Top Products
63
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit
of the same model, you need to register it to that base unit. The handset will
be given a new extension number of that base unit. Only one handset can be
registered at a time. Make sure the base unit and the other handsets are
not being used. Registration must be completed within 1 minute.
1
Handset: Press (SNOOZE/ALARM), and
within 5 seconds press the soft key
().
•
You can also press (CONF/FUNCTION) to directly
enter the function menu and go to step 2.
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Registration” by pressing Ö
or Ñ, and press á.
4
Press á at “HS registration”.
5
Base unit:
Press (MUTE).
•The MUTE indicator light flashes.
6
Handset:
#Press the soft key ( ).
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•You can stop registration by pressing
(SNOOZE/ALARM) or (OFF) on the handset and
pressing (MUTE) on the base unit.
OK
FUNCTION
If you have canceled the handset registration at the previous base unit
(p. 62), start from step 5.
If you have not canceled the handset registration at the previous base unit (p. 62),
the handset number still remains on that base unit memory. To erase the handset
number from the previous base unit, see the base unit Operating Instructions.
Ex. Extension number 2
Copy directory
H
Initial setting
---------------
---------------
H
HS registration
Deregistration
Press MUTE on
base unit, then
OK on handset to
register handset
OK
Handset [2]
ReRegistered
SP
PRIVACY
[
2
]
AUG.10
11
:
30AM
FUNCTION
ALARM
Handset
ReRegistering
SP
PRIVACY
[
-
]
H
Registration
---------------