Filter
Top Products
52
Voice mail service is an electronic on-line answering system offered by
your telephone company. After subscribing, the voice mail system can
answer calls automatically for you when your line is busy or if calls are not
answered, and callers can leave their messages at a voice mail box
located at the telephone company.
After the voice mail box has received messages,
the handset will indicate it in two ways:
(a) “Voice mail” will be displayed, and
(b) “ ” on the display will flash. If registered
to KX-TG2720, the line(s) which received
message(s) will also be displayed.
The access number must be stored within the
system (p. 59).
Listening to Voice Mail messages
1
P
ress the soft key ( ).
•If registered to KX-TG2720, the display will show
as following.
2
For KX-TG2700 users:
Press or
.
For KX-TG2720 users:
Press the soft key ( or )
of the line which received messages.
•The handset is connected to the telephone line
and dials the access number.
3
Follow the pre-recorded instructions.
When finished, press if using the
speakerphone, or press
(OFF)
.
•
If “Voice mail” still remains or “”still flashes on the display even if you
have listened to your voice mail message(s), press (CONF/FUNCTION), and
press and hold (HOLD/CLEAR) until the unit beeps. “Voice mail” will
disappear,
“”will stop flashing.
•
If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voice mail” may not be displayed and “ ” may not
flash.
MAIL
MAIL
MAIL
LINE2LINE1
MAIL
MAIL
Voice Mail Service
(For KX-TG2700/KX-TG2720 Users)
Ex. Registered to KX-TG2720
LINE1 LINE2
Press LINE1 or
LINE2 to listen
to voice mail
00
I
=Booster
LINE1 LINE2 MAIL
Voice mail Line2
11
:
30AM