Filter
Top Products
57
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Number of rings
You can select the number of times the unit rings before the Answering
System answers a call, from “2” to “7” or “Toll saver”*.
The system is preset to “4”.
1. Follow steps 1 to 4 of “Caller’s recording time” on page 56.
2. Press áat “Number of rings”.
3. Select the number of rings by pressing Öor
Ñ, and press the soft key ( ).
SAVE
*Toll saver
When you call the unit from outside: If the Answering System answers
on the 2nd ring, there is at least one new message. If it answers on the
4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
---------------
H
Number of rings
Recording time
SAVE
Number of rings
:4
GF
Remote code
The remote code prevents unauthorized people from accessing your unit
from a touch tone phone and listening to your messages. Choose any
2-digit number (00–99). The remote code must be different from the
password (p. 58).
The factory preset remote code is “11”. If you do not program your own
remote code, you can use “11”.
1. Follow steps 1 to 4 of “Caller’s recording time” on page 56.
2. Scroll to “Remote code” by pressing Öor
Ñ, and press á.
3. Enter a remote code using a 2-digit number
(00–99), using the dialing buttons ((0)to (9)).
4. Press the soft key ( ).
•To check the remote code, repeat steps 1 to 2.
SAVE
Recording time
H
Remote code
Set mailbox2&3
SAVE
Remote code
:11
GF