Filter
Top Products
47
For assistance, please call: 1-800-211-PANA(7262)
Advanced Operation
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press (PAUSE/REDIAL) if a pause is required for
dialing with a PBX or to make a long distance call.
Ex. Line access number (9) (PBX)
(9) \ (PAUSE/REDIAL) \
•Pressing (PAUSE/REDIAL) once creates a 3.5 second pause. This prevents
misdialing when you redial or dial a stored number.
•Pressing (PAUSE/REDIAL) more than once increases the length of the pause
between numbers.
•When storing a phone number in the directory (p. 33), you can also insert a
pause by pressing
Ö
or
Ñ
to scroll to
“
P
”
.
Incoming Call Tone
During an intercom call (p. 40) or while using the Room Monitor feature
(p. 45) or while listening to messages (for KX-TG2730/KX-TG2740 users,
p. 49), you can be informed by two tones if a call arrives. While using one
line, you can be informed if another call arrives on the other line by two
tones (for KX-TG2720/KX-TG2740 users).
If you set to ON, this incoming call tone will be heard for as long as the line
rings. To delete the incoming call tone, set to OFF. To set the incoming call
tone to sound twice, set to “2”. Your phone comes from the factory set to “2”.
Make sure the handset is not being used.
1
Press (SNOOZE/ALARM).
•
You can also press (CONF/FUNCTION) to directly
enter the function menu and go to step 3.
Phone number
AUG.10
11
:
30AM
FUNCTION
ALARM
2
Within 5 seconds, press the soft key
().
3
Scroll to “Ringer setting” by pressing
Ö or Ñ, and press á.
4
Scroll to “Incoming call” by pressing Ö
or Ñ, and press á.
•The current setting will be displayed.
5
Select the desired setting, “On”, “Off” or
“2”, by pressing Ö or Ñ, and press the
soft key ( ).
•A beep sounds.
•To exit the programming mode, press (SNOOZE/ALARM) or (OFF).
SAVE
FUNCTION
Save directory
H
Ringer setting
Date and time
Ringer tone
H
Incoming call
---------------
SAVE
Incoming call
Incomin
tone :2
GF