Filter
Top Products
30
Using the Caller List
The Caller ID Number Auto Edit feature
This feature allows your phone to automatically edit an in-coming Caller ID
number into one pattern you preferred (a, b, and c, p. 29), and display
the Caller ID number with that pattern automatically.
Up to 4 area codes are allowed for this feature for pattern
a
and
b
(p. 29).
To activate this feature, you must (1) set this feature to on, and (2) make
an out-going call from Caller List (p. 28) with a number which has one of 3
patterns that you have edited with considered area code.
The Caller ID number Auto Edit feature is preset to ON at factory.
Make sure the handset is not being used.
1. Press (SNOOZE/ALARM!SET).
•You can also press (CONF/FUNCTION) to directly
enter the function and go to step 3.
2. Within 5 seconds, press the soft key
().
3. Scroll to “Initial setting” by pressing Ö
or Ñ, and press á.
4. Scroll to “Caller ID edit” by pressing Ö
or Ñ, and press á.
5. Select “On” or “Off” by pressing Ö or Ñ.
6. Press the soft key ( ).
•A beep sounds.
•To exit the programming mode, press
(SNOOZE/ALARM) or (OFF).
•When the feature is set to OFF, the handset will still be able to display Caller ID,
like regular Caller ID telephone, but the in-coming Caller ID number will not be
edited by pattern and by area codes.
SAVE
FUNCTION
SAVE
Auto edit
:On
GF
AUG.10
11
:
30AM
FUNCTION
ALARM
Copy directory
H
Initial setting
---------------
Room monitor
H
Caller ID edit
Set tel line