Filter
Top Products
Voice Mail Programming (For KX-TG2700/KX-TG2720 Users)
For Voice mail services and the features, see page 52.
Make sure the base unit and the handset are not being used.
Voice mail access number
1. Press (SNOOZE/ALARM).
•You can also press (CONF/FUNCTION) to directly
enter the function menu and go to step 3.
2.
Within 5 seconds, press the soft key ( ).
3. Scroll to “Initial setting” by pressing Ö
or Ñ, and press á.
4. Scroll to “Voice mail” by pressing Öor Ñ,
and press á.
5. Scroll to “Save VM access#” by pressing Ö
or Ñ, and press á.
6. For KX-TG2700 users: Go to step 7.
For KX-TG2720 users: Press Ö (Line 1) or Ñ(Line 2) to select the line.
•The line selected should be the line with subscription of Voice Mail service
from your telephone company.
7. Enter your access number, up to 32 digits.
•You may enter pauses* (see below).
•Each time you press (HOLD/CLEAR), a digit is
erased. To erase all digits, press and hold
(HOLD/CLEAR).
8. Press the soft key ( ).
•
While the handset is not in use, “ ” will be
displayed on the top right.
To erase a stored number:
In steps 7, press and hold (HOLD/CLEAR)until all of the digits are erased,
and press the soft key ( ).
SAVE
MAIL
SAVE
FUNCTION
59
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
VM tone detect
H
Save VM access#
---------------
Set tel line
H
Voice mail
Set base unit
SAVE
Save VM access#
IH
SAVE
Save VM access#
12344567PPP890
IH
*
For quick access to your voice mail box by using
the soft key ( )
, you
may add pauses between your voice mail box access number and your mail
box password in step 7.
EX. 1-222-333-4444 PPPP 8888
Your voice mail box access number Your mail box password
Pauses
Pressing (PAUSE/REDIAL)once creates a 3.5 seconds delay and counts as
one digit. The delay time depends on a telephone company.
MAIL
AUG.10
11
:
30AM
FUNCTION
ALARM
Copy directory
H
Initial setting
---------------
Ex. Registered to KX-TG2700