Filter
Top Products
Making Calls
24
To put a call on hold
Press (HOLD/CLEAR) twice.
•“Hold” is displayed and the call is put on hold.
•If using the receiver;
–For KX-TG2700/KX-TG2730 users:
The TALK indicator light flashes.
•–For KX-TG2720/KX-TG2740 users:
The TALK indicator light goes out.
•To transfer the call to another person, see page 41;
to transfer to a mailbox to allow the outside party to
leave a message there (for KX-TG2730/KX-TG2740
users), see page 51.
•If a call is kept holding for 6 minutes, an alarm tone
will start to sound. After 4 additional minutes on hold
the call will be disconnected.
To release the hold
For KX-TG2700/KX-TG2730 users:
Press or .
For KX-TG2720/KX-TG2740 users:
Press the relevant line soft key ( or ).
To dial after confirming the entered number
1. Enter a phone number.
•If you misdial, press (HOLD/CLEAR). One digit
will be erased. Dial the correct phone number.
•To cancel, press (OFF).
2. Press or .
•
KX-TG2720/KX-TG2740 users can select a line by
pressing one of line soft keys ( or ),
instead of pressing .
Lighted keypad/Backlit LCD display
The dialing buttons and the display will light when you press any button,
the navigator key, or lift the handset off the charger. After a few seconds
the lights will go out. While you receive a call, they will also light.
LINE2LINE1
LINE2LINE1
Ex. Registered to
KX-TG2720/KX-TG2740
Hold Line1
SP
PRIVACY
[
2
]
LINE1 LINE2 PLAY
L1
3334444