Filter
Top Products
62
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you need to register the
handset to a different base unit of the same model, it may be necessary to
cancel the registration. Only one handset can be canceled at a time near
the base unit.
Make sure the handset and the base unit are not being used.
1
Press (SNOOZE/ALARM).
•
You can also press (CONF/FUNCTION) to directly
enter the function menu and go to step 3.
2
Within 5 seconds, press the soft key
().
3
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
4
Scroll to “Registration” by pressing Ö
or Ñ, and press á.
5
Scroll to “Deregistration” by pressing
Ö or Ñ, and press á.
6
Press (3)(3)(5) (DEL.) to delete the
registration memory.
•If you make a mistake, press (HOLD/CLEAR),
and enter “335”.
7
Press the soft key ( ).
•A beep sounds and the registration memory will
be erased on both the handset and the base
unit.
•
If 3 beeps sound, you entered a wrong code.
Enter “335”, and press the soft key ( ).
•To register the handset to the base unit again,
start from step 5 on page 63 or see page 10.
•
“[-]
”
is shown on the bottom right of the display.
•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or
(OFF)
.
•The handset will not work. To use it again, registration will be required (p. 10, 63).
OK
OK
FUNCTION
Handset [2]
DeDeregistered
Ex. Extension number 2
HS registration
H
Deregistration
---------------
H
Registration
---------------
Copy directory
H
Initial setting
---------------
AUG.10
11
:
30AM
FUNCTION
ALARM
Deregistration
Enter code:335
Enter codeee:335
OK
OK
Press MUTE on
base unit, then
OK on handset to
register handset
SP
PRIVACY
[
-
]