Filter
Top Products
85
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
•Environment — do not place the unit in a room where the temperature is less
than 5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4") clearance around
the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration,
shock, or direct sunlight.
•
Medical — consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids, to determine if they are adequately shielded from
external RF (radio frequency) energy. (The unit operates in the frequency range of
2400MHz to 2480MHz, and the power output level can range 0.04 to 0.4 watts.) Do
not use the unit in health care facilities if any regulations posted in the area instruct
you not to do so. Hospitals or health care facilities may be using equipment that
could be sensitive to external RF (radio frequency) energy.
•Routine care — wipe the unit with a soft cloth. Do not use benzine, thinner, or
any abrasive powder. When you leave the unit unused for a long period of time,
unplug the AC adaptor from the outlet.
•
If there is any trouble — disconnect the unit from the telephone line and connect a
known working phone. If the known working phone operates properly, have your
unit repaired by a Factory Servicenter or other Authorized Servicer. If the known
working phone does not operate properly, consult your telephone company.
Specifications
■ Base unit
Power Supply: AC Adaptor (120 V AC, 60 Hz)
Power Consumption: Standby: Approx. 3.2 W
Maximum: Approx. 6 W
Frequency: 2.40 GHz
–
2.48 GHz
Dimensions (H x W x D)
: Approx. 71 mm x 248 mm x 140 mm
(2
13
⁄16" x 9
3
⁄4" x 5
1
⁄2")
Mass (Weight): Approx. 520 (1.15 Ib.)
■ Handset
Power Supply: Ni-Cd battery (3.6 V, 850 mAh)
Frequency: 2.40 GHz
–
2.48 GHz
Dimensions (H x W x D)
: Approx. 242 mm x 53 mm x 40 mm
(9
17
⁄32" x 2
3
⁄32" x 1
9
⁄16")
Mass (Weight): Approx. 220 (0.48 Ib.)
Security Codes: 1,000,000
■ Dialing Mode: Tone (DTMF)/Pulse
■
Operating Environment
: 5 ˚C – 40 ˚C (41 ˚F – 104 ˚F)
Specifications are subject to change without notice.