Filter
Top Products
74
Canceling Registration/Re-registration
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit
of the same model, you need to register it to that base unit. The handset will
be given a new extension number of that base unit. Only one handset can be
registered at a time. Make sure the base unit and the other handsets are
not being used.
Registration must be completed within 1 minute.
1
Handset: Press (CONF/FUNCTION).
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Registration” by pressing Ö
or Ñ, and press á.
4
Press á at “HS registration”.
5
Base unit:
Press (MUTE).
•The MUTE indicator light flashes.
6
Handset:
#Press the right soft key ( ).
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number “[1]
”
to “[8]” is shown on
the top right of the display.
•You can stop registration by pressing (OFF) on the
handset and pressing (MUTE) on the base unit.
OK
If you have canceled the handset registration at the previous base unit
(p. 73), start from step 5.
If you have not canceled the handset registration at the previous base unit
(p. 73), the handset number still remains on that base unit memory. To erase
the handset number from the previous base unit, see the base unit Operating
Instructions. For KX-TG2720S base unit: (1) press (PROGRAM), (2) press
(MUTE), (3) enter “335#”, and (4) enter that handset number ((1) to (8)).
Ex. Extension number 2
SP
PRIVACY
[
-
]
Handset
ReRegistering
SP
PRIVACY
[
2
]
Handset [2]
RegRegistered
Press MUTE on
base unit, then
OK on handset to
register handset
Set base unit
H
Registration
---------------
Copy directory
H
Initial setting
2Way radio mode
---------------
H
HS registration
Deregistration
OKLINE1 LINE2