Filter
Top Products
64
Special Features
Temporary Tone Dialing
(For Rotary or Pulse Service Users)
Press (TONE) before entering access numbers which require tone dialing.
•
The dialing mode changes to tone. You can enter numbers to access an answering
service, electronic banking service, etc. When you hang up, the mode will return to pulse.
FLASH Button
Pressing (FLASH/CALL!WAIT) also allows you to use special features of
your host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing
mode or the mute (p. 63).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”. Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Set tel line” by pressing Ö
or Ñ, and press á.
4
Scroll to “Set flash time” by pressing Ö
or Ñ, and press á.
5
Press Ö (Line 1) or Ñ (Line 2) to select
the line.
•The line’s current setting will be displayed.
6
Select the desired time by pressing Ö or
Ñ.
7
Press the right soft key ( ).
•A beep sounds.
•To program the other line, start again from step 4.
•To exit the programming mode, press (OFF).
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
SAVE
Set flash time
Line1 :700ms
GF
SAVE
Set dial mode
H
Set flash time
Set line mode
Caller ID edit
H
Set tel line
Voice mail
Copy directory
H
Initial setting
2Way radio mode
Set flash time
G
=Line1
F
=Line2
LINE1 LINE2