Filter
Top Products
67
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Incoming Call Tone
While using one line, you can be informed if another call arrives on the
other line by two tones. During an intercom call (p. 48) or while using the
Room Monitor feature (p. 56), you can also be informed by two tones if a
call arrives. If you set to ON, this incoming call tone will be heard for as
long as the line rings. To delete the incoming call tone, set to OFF. To set
the incoming call tone to sound twice, set to “2”. Both the handset and
base unit are preset to “2”.
Handset
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Ringer setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Incoming call” by pressing Ö
or Ñ, and press á.
•The current setting will be displayed.
4
Select the desired setting, “On”, “Off” or
“2”, by pressing Ö or Ñ.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
Base unit
Use the handset. Make sure the base unit and the handset are not
being used.
1
Press (CONF/FUNCTION), and scroll to “Initial setting” by
pressing Ö or Ñ, and press á.
2
Scroll to “Set base unit” by pressing Ö
or Ñ, and press á.
3
Press á at “Incoming call”.
•The current setting will be displayed.
4
Select the desired setting, “On”, “Off” or “2”,
by pressing Ö or Ñ.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
SAVE
SAVE
Voice mail
H
Set base unit
Registration
---------------
H
Incoming call
Room monitor
Incoming call
Incomin
tone :2
GF
SAVE
Save directory
H
Ringer setting
Copy directory
Ringer tone
H
Incoming call
---------------
Incoming call
Incomin
tone :2
GF
SAVELINE1 LINE2
LINE1 LINE2