Filter
Top Products
39
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Speed Dialer
Storing Phone Numbers
You can store up to 10 phone numbers in the base unit. The dialing
buttons ((0) to (9)) function as memory stations.
Make sure the base unit is not being used.
1
Press (PROGRAM).
•The MUTE indicator flashes.
2
Enter a phone number up to
22 digits.
•If you misdial, press (PROGRAM),
and start again from step 1.
3
Press (AUTO).
4
Press a memory station number
((0) to (9)).
•A beep sounds.
•To store other numbers, repeat steps 1 to 4.
•If a pause is required for dialing, press (REDIAL/PAUSE) where needed.
Pressing (REDIAL/PAUSE) counts as one digit (p. 63).
To erase a stored number
Press (PROGRAM), press (RINGER/AUTO) and press the memory station
number ((0) to (9)) for the phone number to be erased.
Dialing a Stored Number
1
Press (DIGITAL!SP-PHONE).
•You can also press
(LINE1)
or
(LINE2)
, instead of pressing
(DIGITAL!SP-PHONE)
.
2
Press (AUTO).
3
Press a memory station number ((0) to (9))
.
•The stored number is dialed.
•Numbers stored in the base unit can only be dialed from the base unit.