Panasonic KX-TG2720S Telephone User Manual


 
Programmable Settings
22
LCD Contrast
You can program the handset LCD contrast (6 levels). Your phone comes
from the factory set to level 3.
Make sure the handset is not being used.
1
Press (CONF/FUNCTION), and scroll to
Initial setting by pressing Ö or
Ñ, and press á.
2
Press á at LCD contrast.
3
Select the desired contrast by pressing
Ö or Ñ.
Each time you press Ö or Ñ, the LCD
contrast will change.
The number of steps shows the LCD
contrast level.
4
Press the right soft key ( ).
A beep sounds.
To exit the programming mode, press (OFF).
You can exit the programming mode any time by pressing (OFF)
.
SAVE
---------------
H
LCD contrast
Auto talk
LCD contrast
Low High
GF
SAVE
Low High
Level 6
Level 4
Low High
Level 1
Copy directory
H
Initial setting
2Way radio mode
LINE1 LINE2
Base unit
You can set the base unit ringer volume to HIGH, MEDIUM, LOW or OFF.
If set to OFF, the base unit will not ring for the line(s). Your phone comes
from the factory set to HIGH.
Make sure the base unit is not being used.
To select HIGH (preset), MEDIUM or LOW, press (RINGER!L1) or
(RINGER!L2) repeatedly until the desired volume is selected for line 1 or
line 2.
Each time you press the button, the ringer volume will change and ring.
To turn the ringer OFF, press and hold (RINGER!L1) or (RINGER!L2) until
2 beeps sound.
To turn the ringer ON, press (RINGER!L1) or (RINGER!L2).
The ringer will sound at the LOW level.
You can also select each lines ringer volume while a call is being received for the
line. Press Ö or Ñ while the base unit is just ringing for the line.
You can change the ringer tone for each line. See page 65.