Filter
Top Products
To monitor with the handset
1
Press (HOLD) (INTERCOM).
2
Press the right soft key ( ).
3
To call the base unit, press (0).
To call another handset (when the system
has additional handsets, p. 23):
Enter the extension number using the
dialing button ((1) to (8)).
•Your handset will start to monitor the room through the destination unit and
“Room monitor” will display.
•To monitor from the speaker, press . You can place the handset on the
charger but you cannot place it on the base unit to continue monitoring.
Placing the handset on the base unit will disconnect room monitoring. To
switch back to the receiver, press .
•“Room monitor” will display on the monitored handset. The DIGITAL
SP-PHONE indicator lights on the monitored base unit.
MONITOR
57
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
SP
PRIVACY
[
1
]
Press extension#
to call
MONITOR
Press extension#
for room monitor
Room monitor
01
To monitor with the base unit
1
Press (LOCATOR/INTERCOM/TRANSFER), and press (MUTE).
•
The LOCATOR/INTERCOM/TRANSFER indicator light flashes.
2
To call the handset, enter the extension number using the dialing
button ((1) to (8)).
•The base unit will start to monitor the room through the handset.
•The handset will display “Room monitor”.
3
To end monitoring, press (LOCATOR/INTERCOM/TRANSFER) or
(DIGITAL!SP-PHONE).
• The LOCATOR/INTERCOM/TRANSFER indicator light goes out.
•The monitored handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination handset is off or the handset is on
the base unit, busy tones will sound.
LINE1 LINE2
4
To end monitoring, press (OFF) or place the handset on the base unit.
•The base unit user can stop being monitored by pressing
(LOCATOR/INTERCOM/TRANSFER) or (DIGITAL!SP-PHONE). The monitored
handset user can stop being monitored by pressing (OFF).
•If the Room Monitor feature of the destination unit is off
or the destination handset
is on the base unit,
“Denied” will be displayed and busy tones will sound.