Filter
Top Products
10
$“SP” shows when you are using the handset speakerphone during an
intercom call, a conference call or while in the 2-Way Radio mode.
When you monitor a room from the speaker, “SP” will also be displayed.
%“ ” (directory icon) is displayed when storing, viewing, sending or
receiving the directory items (p. 40).
&“PRIVACY” indicates the Call Privacy mode is on (p. 55). The base unit
and other handsets cannot join your conversation.
'The battery icon indicates the battery strength (p. 14).
(The extension number of the handset is displayed if the handset has
been registered to the base unit (p. 23, 74).
)The display shows the dialed number, call status, programming options
and directory items etc. If you subscribe to a Caller ID service, caller
information will be displayed. “Received calls” will be displayed
when new calls have been received.
*The prompts on the bottom line will show corresponding functions of the
three soft keys which are located directly below the display (p. 9).
Ex. The soft key below “ ” will function as key.
+“ ” (extension icon) is displayed with the extension numbers during an
intercom (p. 48) or a conference call (p. 53), or while using the Room
Monitor feature (p. 57) or the 2-Way Radio mode (p. 59).
Backlit LCD display
The lighted handset display will stay on for a few seconds after pressing a
handset button to start operations, lifting the handset or pressing a button
to complete operations such as hanging up a call, viewing the Caller
List/Directory or programming.
SAVESAVE
SP
PRIVACY
[
1
]
Received calls
G
01
SAVE
#“ ” and “ ” (Line status icons) function as follows.
L2L1
)
+
*
# $% & ' (
Off (invisible) The line is free.
On The line is being used.
Flashing
A call is on hold within this system (handset or base unit).
Flashing quickly
A call is being received.
L1 L2
LINE1 LINE2
The handset shows you instructions and information on the display. These
display prompts are shown below.
Display