Filter
Top Products
Intercom
50
Answering Intercom Calls
Handset
When an intercom call is being received, the
handset rings and the display shows the calling
extension.
Press , or (HOLD) (INTERCOM).
•You can also answer the call by pressing any dialing
button (0) to (9), (*) or (#) (Any Key Talk).
To end the intercom, press (OFF) or place the
handset on the base unit or the charger.
Auto Talk:
If you set the Auto Talk feature to ON (p. 20), you can answer a call by
lifting the handset off the base unit without pressing , or (HOLD)
(INTERCOM).
If you purchase an additional handset (p, 23), you can
answer a call by lifting it off the charger.
Base unit
When an intercom call is being received, the base unit rings and the
LOCATOR/INTERCOM/TRANSFER indicator light flashes.
Press (LOCATOR/INTERCOM/TRANSFER) or (DIGITAL!SP-PHONE).
•The LOCATOR/INTERCOM/TRANSFER indicator and the DIGITAL SP-PHONE
indicator light.
To end the intercom, press (DIGITAL!SP-PHONE) or
(
LOCATOR/
INTERCOM/TRANSFER).
•The LOCATOR/INTERCOM/TRANSFER indicator and DIGITAL SP-PHONE
indicator lights go out.
•The ringer volume for internal calls follows the higher level of the two lines.
When the ringer volume is off for both lines (p. 21, 22), the handset and base unit
will ring at the LOW level for internal calls.
•You cannot change the ringer tone for internal calls.
SP
PRIVACY
[
1
]
Call from [0]
Intercom
01
MUTELINE1 LINE2