Filter
Top Products
87
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Display message
Cause & Remedy
• If the radio communication between the
handset and the base unit is partially impaired,
this display will be shown.
• If more than one unit is in use, such as
conducting an external/internal call or listening
to messages, you may not be able to use
another unit. Try again later.
• If 2 other users are listening to messages, or
another user is listening to messages while the
Answering System is responding to a call, you
cannot access a mailbox.
• When the displayed item is being sent to the
destination handset, the directory memory is
full. The transfer is stopped. If you tried to send
all of the items, the item displayed with
“---Incomplete---” and items after it have
not been transferred to the destination handset.
You can press
(OFF) to exit the mode (p. 47,
48). To erase other stored items from the
destination handset directory, see page 46. You
can send all of the items again or send the
items which have not been transferred one by
one (p. 47, 48).
•
If the transfer is stopped for another reason,
“Directory full” will not display, for example:
–
the destination handset may be out of area, or
–
the destination handset user may press
or .
Although you tried to send your directory items to
another handset, your directory is empty.
• W
hen you call the handset or base unit to
monitor, the Room Monitor mode of the
destination unit is set to
OFF (p. 56)
.
•
The called handset is on the base unit. The
handset must be off the base unit to be monitored.
Directory
No items stored
Denied
---Incomplete---
Tom Jones
098-765-4321
Directory full
(The name/number is an
example.)
System is busy.
Please try again
later.