71
Answering System
Remote Operation with the Handset
For assistance, please call: 1-800-211-PANA(7262)
You can access the mailboxes from
your handset and listen to
messages. If “ ” flashes on the
handset, there are new messages in
the mailboxes. Concerning new
message indications on the base
unit, see page 67.
PLAY
To listen to messages
1
Press the right soft key ( ).
•A beep sounds and “Please select Mailbox” will
be heard from the speaker. To switch to the
receiver, press . To switch back to the
speaker, press .
•The mailboxes that have new messages will
flash.
2
Press (#)(1) (Mailbox 1), (#)(2) (Mailbox 2)
or (#)(3) (Mailbox 3).
•If “Enter Mailbox password” is announced and
displayed, Mailbox 2 or 3 has the password.
Enter the password (p. 65).
•“Mailbox (No.)” and the number of new
messages will be announced, and new messages will be played.
•To play all messages in the mailbox, press (5).
•You can enter the desired direct commands for other functions (p. 73).
•If you do not enter a command, the voice menu will start (p. 72).
3
To end remote operation, press (OFF).
PLAY
SP
PRIVACY
[
1
]
Received callss
G
PLAY
Remote operation
#,1=Mailbox1
#,2=Mailbox2
#,3=Mailbox3
(OFF)
PLAY
Soft Key
(
)
PLAY
Ex. New messages exist.
Ex. Mailbox 1 has new
messages.
•To adjust the speaker or receiver volume, press Ñ to increase and press Ö to
decrease.
•If you do not select a mailbox in step 2, the number of new messages in Mailbox
1 will be announced, and new messages will be played.