Filter
Top Products
The included handset is pre-registered at the factory and assigned
the extension number 1. You do not need to register this handset
which has “[1]” on the display.
If you purchase optional handsets, you must register each of them at the
base unit. Only one handset can be registered at a time. A handset will be
assigned the extension number at registration.
The model numbers of the optional handsets are KX-TGA270S,
KX-TGA271V, KX-TGA271W and KX-TGA272S. To order, contact your
dealer or call 1-800-211-PANA(7262) to locate a dealer.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
The handset display shows the instructions as
shown on the right.
1
Base unit: Press (MUTE).
•The MUTE indicator light flashes.
2
Handset:
#Press the right soft key ( ).
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number “[1]
”
to “[8]” is shown on
the top right of the display.
OK
Registration for Additional Handsets
26
SP
PRIVACY
[
-
]
Press MUTE on
base unit, then
OK on handset to
register handset
OK
Ex. Extension number 2
KX-TG2730S Up to 7 optional handsets can be added.
•The illustration is KX-TGA270S.
SP
PRIVACY
[
-
]
Handset
Registering
SP
PRIVACY
[
2
]
Handset [2]
Registered
KX-TG2730S includes a handset with the base unit. You can expand the
system by adding up to 7 optional handsets to the system. A maximum of
8 handsets can be registered at the base unit.
Generally a maximum of 4 extensions excluding or including the base unit
can operate at a time. If 4 other extensions are in use, such as conducting
an external/internal call, you may not be able to use your unit. “System
is busy. Please try again later.” will display when you try to
operate your handset. The maximum operating number may decrease,
depending on the state of usage, such as using the Reception Booster
mode (p. 29), or when the Answering System is taking a call.