Filter
Top Products
You can record your own voice memo message of up to 3 minutes, in the
desired mailbox for other users or yourself.
1
Press (MEMO).
•“Please select Mailbox” is heard.
2
Within 5 seconds, press a mailbox button ((MAILBOX!1), (MAILBOX!2)
or (MAILBOX!3)).
3
After a long beep, talk clearly approximately
20 cm (8 inches) away from the MIC.
•The base unit display shows the elapsed
recording time.
•If you record for over 3 minutes, the unit will
stop recording.
4
When finished, press (MEMO) or (STOP).
•A beep sounds.
•If
“”displays, 6 beeps sound and “Your message was not recorded. Record
your message again.” is announced, start again from step 1.
•If “Memory full” and 6 beeps are heard, the unit will exit recording mode.
Erase some, or all, of the messages (see this page) and try again from step 1.
•
When the memo message is played back with the handset, the handset display will show
the message number of the mailbox and caller information will not be displayed (p. 72).
69
Answering System
For assistance, please call: 1-800-211-PANA(7262)
Erasing a specific message
Press (ERASE) while the message you want to erase is being played
(p. 67).
•A short beep will sound and the message will be erased.
•The unit will continue to play the next message.
Erasing all messages in the mailbox
All of the recorded messages in the desired mailbox can be erased at one
time.
1
Press (ERASE) while the base unit is not being used.
•“To erase all messages, please select Mailbox” is heard.
2
Within 5 seconds, press the MAILBOX button ((MAILBOX!1),
(MAILBOX!2) or (MAILBOX!3)).
•If the Mailbox 2 or 3 has the password, enter it (p. 65).
•A long beep sounds and “Mailbox (No.)” and “No messages” are heard.
Recording a Memo Message
BOX
2
BOX BOX
3
RINGER
FULL
OFFOFF
BOX
1
Ex. Mailbox 1 is selected.