Panasonic KX-TG2730S Telephone User Manual


 
25
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Number of Rings
You can select the number of times the unit rings before the Answering
System answers a call, from 2 to 7 or Toll saver*.
Your phone comes from the factory set to 4.
Make sure the base unit and the handset are not being used.
1
Press (CONF/FUNCTION).
2
Scroll to Initial setting by pressing
Ö or Ñ, and press á.
3
Scroll to Set answering by pressing Ö
or Ñ.
4
Press á.
5
Press á at Number of rings.
The current setting is displayed.
6
Select the number of rings by pressing Ö
or Ñ.
You can also select the number of rings by
pressing (0) (Toll saver*), or (2) to (7).
7
Press the right soft key ( ).
A beep sounds.
To exit the programming mode, press (OFF).
You can exit the programming mode any time by pressing (OFF)
.
SAVE
*Toll saver
When you call the unit from outside:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
Number of rings
:4
GF
SAVE
---------------
H
Number of rings
Recording time
Copy directory
H
Initial setting
2Way radio mode
Set tel line
H
Set answering
Set base unit
Number of rings
:Toll saver
GF
SAVE