Filter
Top Products
72
Remote Operation with the Handset
For Caller ID service users (p. 34)
During playback, the display shows the
name and/or number of the caller whose
message is being played.
To call back the displayed number:
Press the left soft key ( ) while the number is displayed.
•The handset stops playback and automatically dials the phone number.
•If you need to edit the phone number to call back, press the right soft key
( ) until the desired edit pattern displays. The number will be edited to
one of three patterns (p. 37). You can then call back the caller.
EDIT
DIAL
•You can switch to another mailbox by pressing (#) and the mailbox number
((1) to (3)) during the remote operation.
•The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.
•If a call is being received during the remote operation, you will hear incoming
call tones (p. 63). To answer the call, press
or .
•If you hear “Memory full” after playback, erase some, or all, of the messages
(p. 73).
SMITH,JACK
1-234-567-8901
---Message 1----
I
=Repeat
H
=Skip
DIAL EDIT
Voice menu
If no commands are entered after you listened to new messages in the
mailbox and heard “End of final message”, the handset will start the
following voice menu.
“Press 4 to play back new messages. Press 5 to play back all messages.”
•You can enter direct commands even if the voice menu has started.