Filter
Top Products
Zire™ 72 Handheld 599
CHAPTER 27 Customizing Your Handheld
Cont’d
. b. Enter any of the following settings, and then tap OK:
Phone # Enter the phone number for your ISP or dial-in server.
Dial prefix Select the Dial prefix check box, and then enter the number that you
dial before the telephone number to access an outside line. For example, many
offices require that you first dial 9 to dial a number outside the building.
Disable call waiting If your phone has Call Waiting, select the Disable call
waiting check box, and then enter the code to disable Call Waiting. Call Waiting
can cause your session to end if you receive a call while you are connected.
Contact your local phone company for the code that is appropriate for you.
Use calling card If you want to use your calling card when dialing your ISP or
dial-in server, tap the Use calling card check box to select it. Enter your calling
card number on the Use calling card line.
Because MCI works differently, enter the MCI calling card
number in the Phone # field and the phone number in the Use calling card field.
4 Tap Done.
Done
Tip
It’s a good idea to add at
least three commas
before your calling card
number to allow for the
cue delay. Each comma
delays transmission of
your calling card number
for two seconds.
IMPORTANT
[
! ]