Filter
Top Products
142 Troubleshooting
•
last two digits—Release Code. The Release Codes are defined as
follows:
— IP Phone 2004 Phase 1—0
— IP Phone 2004 Phase 2—2
— WLAN Handset 2210—0x06
— WLAN Handset 2211—0x07
— WLAN Handset 2212—0x08
-> dsetShow
TN IP Address Hardware ID TermType
---- --------------- ------------------ ----------
6004 192.168.10.100 180060387641c76600 i2004
600A 192.168.10.200 3000907a017e476607 i2004
value = 0 = 0x0
e2dsetShow command
The e2dsetShow command is used for the handsets in the same manner
as for the IP Phones.
isetCount and isetGet
Use the alias IP address of the handsets in the expression string of the
isetCount and isetGet commands, not the physical IP address. The
following is an example of the isetGet output for the WLAN Handset 2211.
->isetGet "IP == 192.168.10.200"
IP Address Type RegType State Up Time Set-TN Regd-TN
HWID FWVsn
---------- ----- ------- ----- ------- ------- -----
------------ ---------
192.168.10.200 i2004 Regular online 0 00:12:00 062-02
062-02 3000907a017e476607 097.021
UNIStimVsn SrcPort DstPort
--------- ------ ------
2.6 5100 5000
isetReset and isetResetAll
The isetReset command can be used to reset the wireless handsets by
specifying the wireless handset alias IP, not the physical IP address:
-> isetReset "192.168.10.200"
value = 0 = 0x0
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.