Filter
Top Products
102 WLAN IP Telephony Manager 2245 configuration
Procedure 5
Connecting to the WLAN IP Telephony Manager 2245 through a serial port
Step Action
1
Using a DB-9 female, null-modem cable, connect the WLAN IP
Telephony Manager 2245 to the serial port of a terminal or PC.
2
Run a terminal emulation program (such as HyperTer minal), or use
a VT-100 terminal with the following configuration:
•
Bits per second: 9600
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
Note: If using Windows 2000, Service Pack 2 must be installed
to enable the use of HyperTerminal™.
3
Press Enter to display the login screen.
4
Enter the default login admin and the default password admin.
Note: The login name and password are case-sensitive.
The NetLink SVP-II System screen appears.
—End—
Telnet connection
The Telnet method of connection is used for routine maintenance of the
WLAN IP Telephony Manager 2245 for local and remote administration,
depending on the network.
Note: Telnet can only be used after the WLAN IP Telephony Manager
2245 IP address is configured.
Follow the steps in Procedure 6 "Connecting to the WLAN IP Telephony
Manager 2245 through Telnet" (page 103) to connect to the WLAN IP
Telephony Manager 2245 through Telnet.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.