Filter
Top Products
Change the password 109
•
first character must be a letter
•
other characters can be a letter or a number
•
dashes, spaces, and punctuation marks are not allowed
(alphanumeric only)
3
Select Set Password and press Enter. Alternatively, press the S
key on the keyboard.
Record the password and keep it in a safe place.
—End—
If you forget the password, use the steps in Procedure 9 "Changing a
forgotten password" (page 109) to log on to the SVP server.
Procedure 9
Changing a forgotten password
Step Action
1
Connect your terminal to the RS-232 port using a null-modem cable.
2
To communicate with the gateway, open a terminal emulation
program, such as HyperTerminal.
3
Power cycle the SVP server.
4
After the log on prompt appears, within 60 seconds, enter the log on:
maint
5
At the slnk > prompt, enter the password:
admin
A confirmation message appears to inform you that the password is
changed to admin.
6
After the slnk > prompt reappears, enter:
exit
—End—
Proceed to configure the wireless handsets. For more information, see
WLAN Handsets Fundamentals (NN43001-505).
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.