Filter
Top Products
128 Troubleshooting
Message Description Action
Battery Low The Battery Low message
indicates that the battery pack
can be changed while the call
is still in progress.
For the WLAN Handsets 2210/
2211/2212 only, do not press
Power Off/End Call. Place the
call on Hold or Park, quickly
remove the discharged battery
and replace with a charged
battery, power on the handset
and press Power On/Start Call
to resume the call in progress.
For the WLAN Handsets 6120/
6140 only, do not press End.
Place the call on Hold or Park,
quickly remove the discharged
battery and replace with a
charged battery, power on the
handset and press Start to
resume the call in progress.
Not in call: The battery icon
displays whenever the battery
charge is low. The message
Low Battery and a beep
indicate a critically low battery
charge when user is not on the
wireless handset. The wireless
handset does not work until the
battery pack is charged.
Battery Failure The battery pack is not
functioning.
Replace the battery pack with a
new or confirmed battery pack.
Only the approved battery pack
works.
Battery Failed Battery pack is damaged or
incompatible with the handset.
Replace the battery pack with a
new or confirmed battery pack.
Only the approved battery pack
works.
Can’t renew DHCP
yyy.yyy.yyy.yyy
y...y = DHCP server IP address
DHCP server is not responding
to the initial renewal attempt.
Configuration problem. Check
the IP address configuration in
the DHCP server.
Charging ... The wireless handset is
charging in the Desktop
Charger.
No action needed.
Nortel Communication Server 1000
WLAN IP Telephony Installation and Commissioning
NN43001-504 01.02 Standard
Release 5.0 15 June 2007
Copyright © 2004-2007, Nortel Networks
.