Filter
Top Products
Linksys SPA9x2 Phone Administration Guide 91
Supplementary Services Parameters
Customizing SPA9x2 Phones
Using Group Paging
Group Paging lets the user page all the client stations at once. If the client station is on a call
while a group page starts, the call is automatically placed on hold. The speaker on the paged
stations is automatically powered on unless the handset or headset is being used.
Group page is one-way only. The paged client stations can only listen to the call from the
originator.
To start a group page, make a call by dialing pagegroup. For convenience, this special number
is included in the corporate directory. A speed dial or personal directory entry can also be
defined locally on a specific phone.
Using Call Parking
If call parking is enabled, users can store a call so that they or someone else can retrieve it from
another phone (for example, a phone at a co-worker’s desk or in a conference room).
NOTE: This feature is supported only on teh PBS (SIP trunking) system. If the SPA9x2 is on a user
agent (UA) , call parking is not available.
To park a call, perform the following steps when a call comes in on a SPA9x2:
1. Press the park soft button or enter *38.
2. Enter any number (for example, 1234). The call is parked.
3. To retrieve the call from the same phone or another SPA9x2, press unpark or enter *39 .
4. Enter the number previously entered when you parked the call (for example, 1234). This
unparks the call.
Using Call Pick Up and Group Call Pick Up
If Call Pick Up is enabled a user can answer a call that rings on a co-worker’s phone by
redirecting the call to their own phone:
1. Determine which station is ringing (by listening, for example). This is the target station.
2. Press the Pickup soft button or enter *36.
3. When Enter Pick up number appears, enter one of the following:
Serv Annc Service announcement requests can be sent to a customer-
supplied announcement server.
Defaults to no (disabled).
Web Serv Use of the web UI.
Parameter Name Enables/Disables