Linksys SPA942 Telephone User Manual


 
Linksys SPA9x2 Administration Guide 16
Determining SPA9x2 Firmware Version
Getting Started
2
Getting Started
Read this chapter to learn about:
”Determining SPA9x2 Firmware Version” section on page 16
”Downloading the Firmware” section on page 17
”Upgrading SPA9x2 Firmware” section on page 17
”Using the Phone Display and Buttons” section on page 18
”Using the LCD Screen” section on page 20
”Using the Web User Interface” section on page 20
”Using the Personal Directory” section on page 23
”Viewing Call History” section on page 24
”Web Admin Tabs” section on page 24
”Roadmap to Web UI Features” section on page 25
From there you can begin using the web UI to view and change phone, extension, and user
information.
”Obtaining Phone Information (Info Tab)” section on page 27
”System and Product Information” section on page 28
”Phone Status Information” section on page 29
”Understanding Lines, Calls, and Shared Call Appearances” section on page 29
”Extension Status Information” section on page 31
”Line and Call Status Information” section on page 32
”Downloaded Ring Tones” section on page 33
”What’s Next?” section on page 33
Determining SPA9x2 Firmware Version
Perform the following steps to determine the phone’s current firmware version:
1. Press the Menu button on the phone.
2. Press 10, or scroll down until Product Info is highlighted and then press the select soft key.
3. Press 3 from the Product Info menu or scroll down to highlight Software Version and press
the select soft key.