Filter
Top Products
Linksys SPA9x2 Phone Administration Guide 73
Vertical Service Announcement Codes
Setting Regional Parameters
• Secure No Calls (*17)—Defaults to prefer to use unencrypted media for all outbound calls. Applies to
all extensions.
• Secure Next Call (*18)—Prefers to use encrypted media for the next outbound call (on this call
appearance only).
• Do Not Secure Next Call (*19)—Prefers to use unencrypted media for the next outbound call (on this
call appearance only).
• Do Not Disturb (*78)—Applies to all extensions.
• Cancel Do Not Disturb (*79)—Applies to all extensions.
• Block Anonymous Calls—Applies to all extensions.
• Cancel Block Anonymous Calls—Applies to all extensions.
• Blind Transfer (*98)—This allows you to transfer a call to another person without talking to that
person:
1. Put the call on hold.
2. Get a dial tone on another line.
3. Call the person to whom you are transferring the call by pressing *98, followed by their
extension.
4. Hang up the receiver.
Disabling/Deactivating Services
You can disable services handled locally by the phone in one of two ways:
• Clear the star code in the Vertical Service Activation section above
• Disable the service in the Phone tab ”Supplementary Services Parameters” section on
page 89 section
Note that if a service is enabled in the Phone tab but cleared in the Regional tab, the service can
still be enabled/disabled by the end- user from the phone LCD or the web UI.
If a service is disabled, the soft button associated with that service is hidden on the LCD. Also,
any menu item associated with a disabled service is preceded with an exclamation mark (!) .
3-4
Vertical Service Announcement Codes
Vertical Service Announcement Codes allow the network to play a service announcement
when a Supplementary (Vertical) service is activated by the phone (for example, when a user
activates call forwarding in the phone, the phone calls a specific number for the announcement
server to play a message "All your calls will be forwarded to the number 555-555-555").
SPA9x2 phones support all services that can be activated on a phone (call forward, do not
disturb, and so on). Vertical service announcement codes apply only when the user dials the
corresponding star code.