Filter
Top Products
Linksys SPA9x2 Administration Guide 27
Obtaining Phone Information (Info Tab)
Getting Started
Obtaining Phone Information (Info Tab)
Once you log on to the web UI (see ”Using the Web User Interface” section on page 20), you
can check the current status of a SPA9x2 by clicking the Info tab (appears by default):
The info tab shows all current phone and extension information, including phone statistics
and the registration status of all phone extensions. All fields are read-only.
View and change parameters for Unit 1 and Unit 2
(applicable only to SPA962 phones with one or two SPA932
sidecars attached)
932 tab
See
Chapter 10, "Using the SPA932
Sidecar."
To perform these tasks...
Click the Info tab > scroll to this
section...
View phone system and product information such as:
•DHCP
• current IP address
• DNS addresses
• software and hardware versions
Info > System Information
Info > Product Information
See
”System and Product
Information” section on page 28
.
View phone status information such as:
•current time
• broadcast, RTP, and SIP information
•operational VLAN
Info > Phone Status
”Phone Status Notes” section on
page 29
.
View extension status for each extension on the phone,
such as:
• registration state
• mapped SIP port
• message waiting status
Info > Ext Status
”Extension Status Information”
section on page 31
.
To perform these tasks...
On the web UI, click the ...