Linksys SPA942 Telephone User Manual


 
Linksys SPA9x2 Phone Administration Guide Cisco Confidential--First Draft130
SIP Tab
SPA9x2 Phone Field Reference
VLAN Settings
SIP Tab
This section describes the fields for the following headings on the SIP tab:
SIP Parameters, page -130
SIP Timer Values (sec), page -133
Response Status Code Handling, page -134
RTP Parameters, page -135
SDP Payload Types, page -137
•NAT Support Parameters, page -139
Linksys Key System Parameters, page -140
SIP Parameters
Secondary NTP Server IP address or name of secondary NTP server.
Parameter
Description
Enable VLAN Enable this parameter if the switch to which the Linksys
IP phone is connected uses VLAN tagging.
VLAN ID Enter the VLAN tag for the VLAN to which the Linksys IP
phone is assigned. This should be the same VLAN to
which the SPA9000 is assigned.
Enable CDP Enables or disables Cisco Discovery Protocol (CDP).
Defaults to Yes.
Parameter
Description
Max Forward SIP Max Forward value, which can range from 1 to 255.
Defaults to 70.
Parameter
Description