Filter
Top Products
Linksys SPA9x2 Phone Administration Guide 81
Selecting a Language
Setting Regional Parameters
NOTE: You must have an ID, Username, and Password for this site.
Dictionaries are found in the LVS area of the FW and Tools section. Currently dictionaries are
available for the following languages:
•English
•Spanish
•German,
•Dutch
•Italian
•French
•Portuguese
•Danish
•Swedish
•Czech
•Slovak
NOTE: For language selection, the following character sets are supported: Latin2 (Czech,
Hungarian, Polish, Romanian, Croatian, Slovak, Slovenian, Sorbian), Cyrillic (Russian, Bulgarian,
Ukrainian and others), and Latin5 (Turkish).
The phones officially support the ISO-8859-1 to 8859-16 character sets, which encompass all
Eastern and Western European languages. For exceptions, see For exceptions, see
http://wwwin.cisco.com/linksys/smb/files/LVS52_RN_B-WEB_20080123_LB.pdf
The end user can change the language of the phone on the phone by following these steps:
1. Press the Setup button.
2. Select 18 Language, then press the Select soft button.
3. Select Option to change the language.
4. With the desired language selected, press Save.
Creating a Dictionary Server Script
The Dictionary Server Script defines the location of the dictionary server, the languages
available and the associated dictionary. The syntax is as follows:
Dictionary_Server_Script ua="na"/Dictionary_Server_Script
Defaults to blank; the maximum number of characters is 512. The detailed format is as follows:
serv={server ip port and root path};
d0=language0;x0=dictionary0 filename;
d1=language1;x1=dictionary1 filename;
d2=language2;x2=dictionary2 filename;
d3=language3;x3=dictionary3 filename;
d4=language4;x4=dictionary4 filename;
d5=language5;x5=dictionary5 filename;
d6=language6;x6=dictionary6 filename;