System and Control Options
69
9.9.1 Change Password
A password is required to access the Universal Monitor’s system and
control options, as described in 9.1 - Login. The password consists of
four characters (see Table 20 for valid characters). The default pass-
word is AAAA.
Change the Password
To change the password:
• From the Setup System Info Menu, use the arrows
↑↓ to choose
Change Password, then press Enter ↵.
• To change your password:
• Use the arrows
↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Reset Password to the Factory Default (“AAAA”)
To reset the password to the factory default of AAAA:
• Locate DIP switch 1 on the unit’s circuit board (see 1.7 - Controller Board Overview) and move
all switches to the OFF position (down).
• Move the second switch to the ON position, then to the OFF position.
• Move the seventh switch to the ON position, then to the OFF position.
• Move the eighth switch to the ON position, then to the OFF position.
The password should now be AAAA.
9.9.2 Change Date & Time/Automatic Daylight Saving Time
The Universal Monitor has a built-in real-time clock that is backed up by an encapsulated lithium
battery and set up to adjust automatically for daylight saving time twice a year. The Setup System
Info menu allows you to change the date or time or automatic adjustment at any time.
To change the daylight saving time setting, date or time:
• From the Setup System Info Menu, use the arrows
↑↓ to choose
Change Date & Time, then press Enter ↵ .
• To change the daylight saving time setting:
• To the right of Daylight Svg Time?
use the arrows ↑↓ to
choose Y (Yes - automatically adjust for daylight saving time)
or N (No), then press Enter ↵ .
• The format of the date and time is DD-MMM-YY HR:MM:SS. To
change the date or time:
• Press Enter ↵ to advance to the next character position you
want to change.
• Use the arrows
↑↓ to choose from available entries:
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Date Day (DD) 0-31
Month (MMM) JAN-DEC
Year (YY) 00-99
Time Hour (HR) 00-23
Minutes (MM) 00-59
Seconds (SS) 00-59
Setup System Info Menu
SETUP SYSTEM INFO
> CHANGE PASSWORD
CHANGE DATE & TIME
↑↓=NEXT ↵ =SELECT
SETUP SITE ID
CONNECT BATTERY
SETUP SERV PH NUM
FACTORY DEFAULTS
Change Password
CHANGE PASSWORD
AAAA
↑↓=SELECT ↵ =NEXT/END
Setup System Info Menu
SETUP SYSTEM INFO
CHANGE PASSWORD
> CHANGE DATE & TIME
↑↓=NEXT ↵ =SELECT
SETUP SITE ID
CONNECT BATTERY
SETUP SERV PH NUM
FACTORY DEFAULTS
Change Date & Time
CHANGE DATE & TIME
DAYLIGHT SVG TIME: Y
18-MAY-02 10:56:30
↑↓=SELECT ↵ =NEXT/END