System and Control Options
61
Select Modem Setup
4. From the Setup System Menu, shown at right, use the arrows
↑↓ to
choose Setup Modem&Pagers and press Enter ↵ .
5. Use the arrows
↑↓ to choose Setup Modem from the Pagers &
Modem Menu and press Enter ↵ .
6. The Setup Modem Menu displays the initialization string
(Init String), which may consist of up to 40 characters (see
Table 20 for valid characters). The default Init String is ATS0=1.
International Dialing
7. To enable international dialing involving countries that do not
support country code B5 (see Table 28), you must add the
appropriate country codes to the initialization string using the
format:
+GCI=xx
where xx is the country code.
(This also requires the modem model MT5600SMI; the model num-
ber can be found on the modem label.)
Note: For countries that support B5, there is no need to add coun-
try codes to the init string.
Edit the Init String
8. To enter or edit the Init String:
• Use the arrows
↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Table 28 Country codes
Country Code* Country Code* Country Code* Country Code*
Argentina 07 Finland FD Italy FD Philippines B5
Australia 09 France FD Japan 00 Portugal FD
Austria FD Germany FD Korea B5 Slovak Republic FD
Belgium FD Greece FD Liechtenstein FD Spain FD
Canada B5 Hong Kong 99 Luxembourg FD Sweden FD
China B5 Hungary FD Mexico B5 Switzerland FD
Cyprus FD Iceland FD Netherlands FD Taiwan FE
Czech Republic FD Indonesia 99 New Zealand 7E United Kingdom FD
Denmark FD Ireland FD Norway FD United States B5
* B5 is the default setting—initialization string +GCI=xx is not needed for these countries
Setup System Menu
SETUP INPUT
SETUP COMMON ALARM
SETUP SENSOR
SETUP I/O MATRIX
↑↓=NEXT ↵ =SELECT
SETUP OUTPUT
> SETUP MODEM&PAGERS
SETUP SYSTEM INFO
SETUP EXP BOARD
Pagers & Modem Menu
SETUP PAGERS
> SETUP MODEM
↑↓=NEXT
↵ =SELECT
Setup Modem Menu
ENTER INIT STRING
ATS0=1
↑↓=NEXT
↵ =SELECT