Filter
Top Products
P A Y C L O C K U S E R ’ S G U I D E
66
Appendix C - PayClock Client
Software WAN Installation
These instructions identify the steps to configure the PayClock Client
software to communicate with the PayClock database server across
the internet.
Important Notes - WAN Installation Requirements
There must be a VPN tunnel connecting the local and remote
sites.
The network administrator may be required to configure the
network routers to route the ports used by the PayClock
Client and PayClock database server.
A static IP address is required on the computer designated as
the PayClock database server.
PayClock must be licensed as a “Multi-User” system,
additional license fees may apply.
Important Port Information - The following ports are used for this
type of installation.
7350 - PC600 Service
7351 - PC600 Auto Poll Service
2638 - PayClock Database Server
Step #1 - Computer where the PayClock database server will
reside
Install the PayClock Server (Standard Install).
Print out the “Server Summary” information. Note: If the
“Server Summary” information was not printed during the
installation follow these steps to access the information:
Open the PayClock software.
Click the PayClock orb on the upper left.
From the menu select Support Assistant.