Filter
Top Products
43
english
Jabra PRO 9460, Jabra PRO 9460 DUO, Jabra PRO 9465 DUO AND Jabra PRO 9470 USER MANUAL
Headset Signal Tones
The headset uses a variety of soft tones to alert you to events such as an incoming call, multifunction button presses,
volume changes, and more. These enable you to keep track of what is going on while you are wearing the headset.
State or event Tone description
Sample
(click to play)
Button tap A quick medium tone
Button double-tap Two button-tap tones
Button press The button-tap tone followed by a longer tone
Maximum volume reached Two short, high notes
Minimum volume reached Two short, low notes
Mute
A quick medium tone, rest and quick low tone;
repeats occasionally
Incoming desk phone call A very fast, high-pitch melody
Incoming softphone call A very fast, medium-pitch melody
Incoming mobile phone call A very fast, low-pitch melody
Incoming call on another phone while
on call (call collision)
Two short tones, played in quick succession, that repeat
every time the ring signal is received by the base.
Incoming call on the same phone
while on call (call waiting)
Generated by the phone system
Target changed to desk phone
A slow, high melody; or a human voice announcing
“desk phone” in English
Target changed to softphone
A slow, medium melody; or a human voice
announcing “softphone” in English
Target changed to mobile phone
A slow, deep melody; or a human voice announcing
“mobile phone” in English
Call ended A quick melody ending on a low note
Battery low Two very quick, low tones; repeats occasionally
Pairing succeeded Three slow tones ending on a medium-high note
Error (such as pairing failed) Three quick tones followed by a lower long tone
Start conference — prompts you to
accept pairing of a secondary headset
for a conference-call connection
Two tones of equal length and pitch followed by a
longer, higher tone
End conference — signals the end of
secondary pairing
Two tones of equal length and pitch followed by a
longer, lower tone
Out of range — the headset is out of range
of the base and the DECT signal is lost
Three quick, descending tones. The sequence repeats
every 4 seconds while the headset is out of range
Table 5: Headset signal tones and their meanings