Filter
Top Products
39
english
Jabra PRO 9460, Jabra PRO 9460 DUO, Jabra PRO 9465 DUO AND Jabra PRO 9470 USER MANUAL
7.2 ATTACHING OR DETACHING A WEARING STYLE
Note: Jabra PRO 9460 Duo and Jabra PRO 9465 Duo headsets are always worn as headbands.
Attaching the headband
1. Align the mounting surface of the headset with matching socket on the headband attachment.
2. Press the headset assembly firmly onto the outer side of the headband attachment until it clicks into place
(snap-to-click). If you have trouble pressing them together, try to rotate the boom arm about 30 and try
again. Refer to the figure in the section 4.3: “Assemble the Headset” earlier in this manual.
3. Rotate the headset boom arm for left- or right-ear use as needed. Always position the microphone so that it
sits as close to the corner of your mouth as possible when you wear the headset.
4. Adjust the length of the headband to fit snugly around your head.
See also Section 7.1: How to Wear the Headset for illustrations.
Detaching the headband
1. Hold the assembly firmly in both hands, with the headset in one hand and the ear-cushion assembly of the
wearing-style attachment in the other.
2. Gently pull the headset away from the headband attachment until it comes free. If you have trouble pulling
them apart, try to rotate the boom arm about 30 and try again.
Figure 45:
Detaching a wearing-style attachment from the headset
Attaching the ear hook
Note: The ear hook is delivered pre-assembled for wearing on your right ear with the medium sized
earbud mounted.
1. Decide whether you want to wear the ear hook on the left or right ear — you might need to pull out the hook
itself from its attachment, rotate it 180 degrees and then push it back in to change left/right orientation. Left
and right assemblies are shown on the previous page in the figure “Assembling and wearing the Jabra PRO
headset in various styles”:
The point at which the hook is attached — marked with the text “Jabra” — must always be in front of the hook
itself.
2. Try placing the ear hook with an earbud mounted in your ear. If it does not fit snugly in your ear, pull the
earbud off the attachment and put on another size (small, medium and large earbuds are delivered as
standard.)
3. Try to wear the ear hook and adjust it to fit snugly around your ear. Remember that:
- the hook itself rotates on the attachment.
- the hook itself is flexible and can be easily bent to wrap snugly around your ear.
- the height of the hook relative to its attachment can be adjusted to suit your ear. To do this, slide the
attachment up or down.