Filter
Top Products
18
english
Jabra PRO 9460, Jabra PRO 9460 DUO, Jabra PRO 9465 DUO AND Jabra PRO 9470 USER MANUAL
Connecting to a Desk Phone without a Headset Port
If your desk phone does not include any built-in support for adding a headset, then connect the Jabra PRO base
between the handset and the desk-phone body as described below.
Figure 12:
Connecting to a desk phone without a headset port
1. On your desk phone, unplug the handset cable from the phone body at the phone-body side.
2. Plug the loose end of your handset cord to the port marked
on the base.
3. Connect the telephone cord included with your headset from the port marked
on the Jabra PRO base to
the handset port on your desk phone body.
4. Your base and desk phone are now connected. Note, however, that you must still configure the base for your
specific desk-phone model using the desk phone setup wizard. See the section “Configuring the Jabra PRO Base
for your Desk Phone”.
Connecting to a Standard Headset Port
If your desk phone includes a dedicated headset port, then take advantage of this feature by connecting the
Jabra PRO base as follows:
Figure 13:
Connecting to a desk phone with a headset port