Filter
Top Products
62 OL-23119-01
Report Problems on Your Phone
1. Press the Quality Reporting Tool button.
2. Select the item that most closely matches your problem. (Use the Navigation pad and Select button
to scroll and select.)
3. Press the Select softkey.
The information is sent to your system administrator.
Redial
Redial allows you to call the most recently dialed phone number by pressing a button.
Redial a Number
Press the Redial softkey.
To place the call on a specific phone line, get a dial tone on that line, then press the Redial softkey.
Secure and Nonsecure Indication Tone
When a phone is configured as secure (encrypted and trusted), it can be given a “protected” status.
After that if desired, the protected phone can be configured to play an indication tone at the beginning
of a call.
Only protected phones hear these secure or nonsecure indication tones. (Nonprotected phones never
hear tones.) If the overall call status changes during the call, the indication tone changes accordingly.
The protected phone plays the appropriate tone.
A protected phone plays a tone or not under these circumstances:
• When the option to play a tone, “Play Secure Indication Tone option,” is enabled (True):
–
When end-to-end secure media is established and the call status is secure, the phone plays the
secure indication tone (three long beeps with pauses).
–
When end-to-end nonsecure media is established and the call status is nonsecure, the phone
plays the nonsecure indication tone (six short beeps with brief pauses). (This capability is a
change with this release.)
• When the Play Secure Indication Tone option is disabled, no tone is played.
For more information, see your system administrator.