Filter
Top Products
Calling Features
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) 59
Switch an In-Progress Call on Your Desk Phone to a Mobile Phone
1. Press the Mobility button.
2. Select Send call to mobile.
3. Answer the in-progress call on your mobile phone.
The desk phone line button turns red and handset icons and the calling party number appear on
the phone display. You cannot use the same phone line for any other calls, but if your desk phone
supports multiple lines, you can use another line to make or receive calls.
Switch an In-Progress Call From a Mobile Phone to Your Desk Phone
1. Select a line on your desk phone.
2. Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
3. Press the Resume softkey on your desk phone within five to 10 seconds and start talking on the
desk phone.
Hand Off an In-Progress Call From a Mobile Phone to Your
Desk
Phone
1. While on your mobile phone, press the access code for the handoff feature (for example, *74).
See your system administrator for a list of access codes.
2. Hang up the call on your mobile phone to disconnect the mobile phone, but not the call.
3. Press the Answer softkey on your desk phone within 10 seconds and start talking on the
desk phone. Your system administrator sets the number of seconds to answer the call on your
desk phone.
The Cisco Unified devices that share the same line display a Remote In Use message.
Mute
Mute allows you to block audio input for your handset, headset, and speakerphone, so that you can
hear other parties on the call but they cannot hear you. Video Mute allows you to block video for your
camera, so that you can see other parties on the video call, but they cannot see you.