Cisco Systems ATA 186 Telephone User Manual


 
5-12
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
MGCP Configuration Parameters
MGCP Configuration Parameters
This section describes the following parameters, which include Call Agent parameters:
CA0orCM0, page 5-12
CA1orCM1, page 5-13
CA0UID, page 5-13
CA1UID, page 5-14
EPID0orSID0 and EPID1orSID1, page 5-14
PrfCodec, page 5-15
LBRCodec, page 5-15
MGCPPort, page 5-16
MediaPort, page 5-17
RetxIntvl, page 5-17
RetxLim, page 5-17
MGCPVer, page 5-18
Domain, page 5-18
CA0orCM0
Description
Specify the primary Call Agent in this parameter. This parameter must be an IP address or URL and may
include a port parameter. The default port number is 2727.
If you specify a port, you must separate the port number from the host IP address with a colon (:).
Examples
Examples of CA0orCM0 values follow:
192.168.1.2:2727
ca.cisco.com.
Value Type
Alphanumeric string
Range
Maximum 31 characters
Default
0
Voice Configuration Menu Access Code
5