Cisco Systems ATA 186 Telephone User Manual


 
A-3
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Appendix A Voice Configuration Menu Codes
Table A-3 lists codes used in the software upgrade process. For information about these codes, see
Chapter 7, “Upgrading the Cisco ATA Signaling Image.”
Static network route address 2 Network router address
Static subnet mask 10 Specifies the subnet mask for the Cisco ATA.
TFTP URL 905 IP address of the TFTP server when TFTP
configuration is used
UDP ToS bits 255 Determines the precedence and delay of UDP IP
packets
Use TFTP 305 Enables TFTP as configuration method
VLANSetting 324 Enables VLAN ID and 802.1Q priority for Voice
Audio IP packet and Signaling IP packet
Table A-2 Cisco ATA Voice Menu Codes—Configuration Parameters (continued)
Option
Voice Menu
Code Description
Table A-3 Cisco ATA Voice Menu Codes—Software Upgrade
Option
Voice Menu
Code Description
Upgrade software 100 Used in the software process to enter the IP address of
the PC
Upgrade language to English 101 Changes or upgrades the voice prompt language to
English when upgrading software