Cisco Systems ATA 186 Telephone User Manual


 
4-6
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 4 Cisco ATA-Supported MGCP Services
Complete Reference Table of all Cisco ATA MGCP Services
Fax pass-through AudioMode, page 5-20
ConnectMode, page 5-24
G.711 codec AudioMode, page 5-20
G.711 silence suppression AudioMode, page 5-20
Hook-flash event time requirements SigTimer, page 5-26
ID of primary Call Agent CA0orCM0, page 5-12
ID of secondary Call Agent CA1orCM1, page 5-13
Listening port for MGCP commands MGCPPort, page 5-16
Low bit-rate codec selection LBRCodec, page 5-15
MGCP version string identifier MGCPVer, page 5-18
Mid-call service style—Bellcore, Cisco VG248
or Cisco ATA
ConnectMode, page 5-24
Named Signaling Event (NSE) payload number ConnectMode, page 5-24
Registration ConnectMode, page 5-24
(Also see the “Endpoints and Connections”
section on page 4-3 and the “Cisco ATA
Registration Process with MGCP” section on
page 4-4.)
Ring-cadence pattern RingCadence, page 5-40
Real-Time Transfer Protocol (RTP) media port MediaPort, page 5-17
Real-Time Transfer Protocol (RTP) packet size NumTxFrames, page 5-21
Retransmission interval for MGCP commands RetxIntvl, page 5-17
Retransmission of commands—Maximum
number of times to retransmit
RetxLim, page 5-17
Secondary domain name server DNS2IP, page 5-11
Static network router probe OpFlags, page 5-27
TFTP file—Set to not use internally generated
name
OpFlags, page 5-27
Tones: BusyTone, CallWaitTone
ConfirmTone, DialTone, ReorderTone, and
RingBackTone parameters
Tone Configuration Parameters, page 5-29
Tracing TraceFlags, page 5-41
Type of Service (TOS) bits TOS, page 5-29
VLAN encapsulation OpFlags, page 5-27
VLAN 802.1Qtags
VLAN UDP and TCP COS fields
OpFlags, page 5-27
VLAN mode OpFlags, page 5-27
Web configuration—disallowing OpFlags, page 5-27
Table 4-1 Configurable Features and Related Parameters for MGCP (continued)
Configurable Feature Related Parameter