Filter
Top Products
x
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Preface
Organization and Use
Organization and Use
Organization
Table 1 provides an overview of the organization of this guide.
Conventions
This document uses the following conventions:
• Alternative keywords are grouped in braces and separated by vertical bars (for example, {x | y | z}).
• Arguments for which you supply values are in italic font.
• Commands and keywords are in boldface font.
• Elements in square brackets ([ ]) are optional.
• Information you must enter is in boldface screen font.
Table 1 Cisco ATA 186 and Cisco ATA 188 Analog Telephone Administrator’s Guide (MGCP) Organization
Chapter Description
Chapter 1, “Cisco Analog Telephone Adaptor Overview” Provides descriptions of hardware and software features of
the Cisco ATA Analog Telephone Adaptor along with a brief
overview of the Media Gateway Control Protocol (MGCP).
Chapter 2, “Installing the Cisco ATA” Provides information about installing the Cisco ATA.
Chapter 3, “Configuring the Cisco ATA for MGCP” Provides information about how to configure the Cisco ATA
and about the different configuration methods you can use.
Chapter 4, “Cisco ATA-Supported MGCP Services” Provides a list of required parameters and information about
MGCP-specific services that the Cisco ATA supports.
Chapter 5, “Parameters and Defaults” Provides information on the parameters and defaults that you
can use to configure the Cisco ATA.
Chapter 6, “Configuring and Debugging Fax Services” Provides instructions for configuring both ports of the
Cisco ATA to support fax transmission.
Chapter 7, “Upgrading the Cisco ATA Signaling Image” Provides instructions for remotely upgrading the Cisco ATA
signaling image.
Chapter 8, “Troubleshooting” Provides basic testing and troubleshooting procedures for the
Cisco ATA.
Appendix A, “Voice Configuration Menu Codes” Provides a quick-reference list of the voice configuration
menu options for the Cisco ATA.
Appendix B, “Cisco ATA Specifications” Provides physical specifications for the Cisco ATA.
Appendix C, “MGCP Call Flows” Provides Cisco ATA call flows for MGCP scenarios.
Appendix D, “Recommended Cisco ATA Tone Parameter
Values by Country”
Provides tone parameters for various countries.
Index Provides reference information.
Glossary Provides definitions of commonly used terms.