Filter
Top Products
Index
IN-2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
common parameters
configuration
3-9
conference connection mode setting 5-25
conferences 1-2
configuration 5-27
802.1Q VLAN ID 5-11
alternate Call Agent 5-13
atadefault.cfg file 3-12
audio operating mode 5-20
brackets for IP address of endpoint identifier
setting
5-25
Caller ID format 5-21
call-progress tones 5-29
syntax 5-29
call waiting period 5-26
CDP discovery setting 5-27
CED tone detection
disabling
5-20
cfgfmt.exe tool 3-10, 3-15
codec names 5-19
conference connection mode setting 5-25
connection mode 5-24
default values 5-2
domain-name portion of endpoint ID 5-18
DtmfMethod 5-20
endpoint identifiers 5-14
fax pass-through redundancy setting 5-24
G.711µ-law setting for fax pass-through 5-25
G.711A-law setting for fax pass-through 5-25
G.711 silence suppression 5-20
G.729 codec setting by port 5-25
hook flash time 5-26
listening port 5-16
low-bit-rate codecs 5-20
maximum retransmission of commands 5-17
methods
using TFTP and DHCP servers
3-8, 3-9
Web-based 3-23
Wed-based 3-25
NCS-compliant Session Description Protocol (SDP)
setting
5-25
NSE payload type 5-24
parameters
AudioMode
5-20, 6-2, 6-6
CA0UID 5-13
CA1UID 5-14
CallerIdMethod 5-21
CfgInterval 5-5
CodecName 5-19
ConnectMode 6-3
DHCP 5-8
DNS2IP 5-11
EncryptKey 5-6, 8-14
MediaPort 5-17
MGCPPort 5-16
MGCPVer 5-18
NumTxFrames 5-21
OpFlags 5-27
RetxIntv 5-17
RetxLim 5-17
SigTimer 5-26
StaticIp 5-9
StaticNetMask 5-10
StaticRoute 5-9
TftpURL 5-5
TraceFlags 5-41
UIPassword 5-3, 8-14
persistent hook-flash events setting 5-25
persistent on-hook and off-hook events setting 5-25
PING period 5-26
preferred codec 5-15
primary Call Agent 5-12
quarantine handling mode setting 5-25
refresh interval 4-2
required parameters 4-2
retransmission interval 5-17
ring cadence pattern 5-40
RSIP*@ipaddress syntax setting 5-25