Filter
Top Products
5-8
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
Network Configuration Parameters
Voice Configuration Menu Access Code
Not applicable for this parameter.
Related Parameters
• UseTFTP, page 5-4
• TftpURL, page 5-5
• EncryptKey, page 5-6
Network Configuration Parameters
This section includes the parameters for enabling or disabling the use of a DHCP server to obtain IP
address information, and parameters that you need to statically configure if you disable DHCP:
• DHCP, page 5-8
• StaticIp, page 5-9
• StaticRoute, page 5-9
• StaticNetMask, page 5-10
• DNS1IP, page 5-10
• TOS, page 5-29
• VLAN Setting, page 5-11
DHCP
Description
This parameter can be used to automatically set the IP address of the Cisco ATA, the network route IP
address, the subnet mask, DNS, NTP, TFTP, and other parameters.
• 1—Enable DHCP
• 0—Disable DHCP
Value Type
Boolean
Range
0 or 1
Default
1