Filter
Top Products
5-42
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
Diagnostic Parameters
Value Type
Extended IP address
Default
0.0.0.0.514
Voice Configuration Menu Access Code
7975640
Related Parameter
SyslogCtrl, page 5-42
SyslogCtrl
Description
Use this parameter to turn on specific syslog traces. All traces are sent to the syslog server specified in
the SyslogIP parameter.
See Table 5-7 for bit values and the corresponding types of messages to turn on for tracing.
Value Type
Bitmap
Default
0x00000000
Voice Configuration Menu Access Code
7975641
Related Parameter
SyslogIP, page 5-41
Table 5-7 SyslogCtrl Parameter Definitions
Bit Number Type of Messages to Trace
0 ARP messages.
1 DHCP messages
2 TFTP messages
3 Cisco ATA configuration-update messages.
4 System reboot messages
5-7 Reserved.
8 SCCP messages
9 Cisco ATA event messages.
10 FAX messages.
11-15 Reserved.