Cisco Systems ATA 186 Telephone User Manual


 
5-9
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide for MGCP (version 3.0)
OL-4803-01
Chapter 5 Parameters and Defaults
Network Configuration Parameters
Voice Configuration Menu Access Code
20
Related Parameters
StaticIp, page 5-9
StaticRoute, page 5-9
StaticNetMask, page 5-10
OpFlags, page 5-27 (bits 3 and 11)
StaticIp
Description
Configure the Cisco ATA IP address using this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
1
Related Parameters
DHCP, page 5-8
StaticRoute, page 5-9
StaticNetMask, page 5-10
StaticRoute
Description
Configure the Cisco ATA statically assigned route in this parameter if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0